3 Basic Operation of ECDIS 3-117
ECDIS
3.18 User-Marking/Highlighting
can input the following marks on the chart.
●Event Mark : During voyage, you can put an Event Mark at the ship position.
●Information Mark: You can put an Information Mark at any position.
●Tidal Stream Mark: You can put an Tidal Mark at any position. The speed (knot) and time can be input.
●Highlight: You can put a highlight area at any position for your reference.
3.18.1 Marking the Event Mark
(1) Event Marking using the display panel
During voyage, you can put an Event Mark ( ) at the point where your ship is located.
1) On the display panel
Left-click the [Event ].“Location/Attributes - Event Mark” panel opens.
- To check the Information on the Event Mark ,see 3.14 “Reading Out Information on the
Objects”.
(2) Event Marking using the menu
1) In the normal menu
Select [MENU] - [(6) Chart] - [(1) Marking/Highlighting] - [(1) Event Mark] in that order.
In the Table Editing menu, Graphic Editing menu
Select [MENU] - [(5) Chart] - [(1) Marking/Highlighting] - [(1) Event Mark] in that order.
In the User Chart Editing menu
Select [MENU] - [(4) Chart] - [(1) Marking/Highlighting] - [(1) Event Mark] in that order.
The “Location/Attributes - Event Mark” panel opens.
Information Mark
Highlighing
Own ship
Event Mark
Tidal Stream Mark
To Next Page
Loading...
