3 Basic Operation of ECDIS 3-152
3.27 Own Ship’s Setting
The following settings on own ship are explained here.
●Primary position (of own ship) and secondary position settings
●Vector display and heading line at the primary position
●Danger detection vector and sector
●Primary position track and time label, etc.
Each item is shown in the following figure.
[Own Ship’s Setting Items]
1) In the normal menu
Select [MENU] - [(4) Ownship/Track] - [(0) Setting] in that order.
The “Own Ship Setting” panel is displayed.
COG vector
Danger detection sector
Own ship
Heading line
HDG vector
Danger detection vector
Time labels
Tracking past position dots
Tracking period
Own ship
Beam line
To Next Page
Loading...
