3 Basic Operation of ECDIS 3-158
3.27.5 Heading Line and Beam Line
You can set the Heading Line and Beam Line for display ship’s direction.
1) In the normal menu
Select [MENU] - [(4) Ownship/Track] - [(0) Setting] in that order.
The “Own Ship Setting” panel is displayed.
2) Left-click the item to select it.
Heading line
Left-click to turn it ON/OFF.
Heading line
Beam line
When [Display Heading Line] is ON setting, Left-click to turn it ON/OFF.
Heading Line and Beam line
3) Left-click the [OK] on the “Own Ship Option” panel to close it.
To Next Page
Loading...
