3 Basic Operation of ECDIS 3-186
3.33 Setting Radar Options
3.33.1 Setting of RADAR
1) In the normal menu
Select [MENU] - [(7) Main] - [(9) Radar Overlay] - [(0) Setting] in that order.
In the Table Editing menu, Graphic Editing menu, User Chart Editing menu
Select [MENU] - [(6) Main] - [(9) Radar Overlay] - [(0) Setting] in that order.
The “Radar Option” panel opens.
2) After setting the items as required, left-click the [Close] button on the panel to close it.
Note:
• For details on each setting item, refer to the INSTRUCTION MANUAL for Radar being used.
• The “Rader Option” panel will not be displayed if an optional radar board is not installed.
IR (Interference Rejection):
This function is used to remove unnecessary signals from
other radars when they are superimposed over the
selected radar signal.
To Adjust the Radar Image Using the “Radar Option” Panel:
1) Select value with the scroll bar.
2) Left-click the [Close] button to close the “Radar Option”
panel.
Gain Adjust/Sea Adjust/Rain Adjust/Video
You can adjust these items using the dials on the operation
panel other than using the dialog box
To Next Page
Loading...
