4 Route Planning
4-39
ECDIS
4.1.3.4 Making a New Route File (Graphic Editing)
This explanation is made according to (1) “Making a new route file (Graphic Editor)” in 4.1.3.3 “Operation
Flowchart for Graphic Editor (Graphic Editing)”.
(1) Unloading the selected route before starting
Before starting, left-click the ROUTE drop-down button on the
display panel, and then left-click the [UNLOAD] to clear any
route on the screen.
(2) Entering the Graphic Editing mode
1) In the normal menu
Select [MENU] - [(2) Route] - [(1) Route Planning] - [(2) Graphic Editor] in that order.
• When you open the Graphic Editing menu, rotate the trackball to move the cursor on upper part
of screen.
Then, the Graphic Editing menu title bar opens. To close it, left-click any position on the chart.
[Graphic Editing Menu]
(3) Opening a new route file
1) To make a new route file, left-click the [New] button.
In the Graphic Editing menu
Select [MENU] - [(1) File] - [(1) New] in that order.
How to save the route:
The route file saving operation is exactly the same as for Table Editor.
See (5) “Saving the route file” in 4.1.2.4 “Making a New Route File (Table Editor)”.
To Next Page
Loading...
