5 Chart Editing
5-3
ECDIS
5.1 Chart Edit Mode
There are two modes in this Chart Edit mode: User Map Edit mode and Manual Update mode. Follow
the procedure below to start there modes.
User Map Edit mode:
In the normal menu
Select [MENU] - [(5) User Map] - [(3) User Map Editor] in that order.
A map edit screen as shown below will be displayed. Use this screen to create/edit a user map.
[User Map Editing Screen]
Manual Update mode:
In the normal menu
Select [MENU] - [(6) Chart] - [(8) Manual Update] in that order.
A chart edit screen similar to the above will be displayed (buttons at the top and the object entering
screen on the left are slightly different). Use this screen to manually update a chart.
How to open the Chart Edit menu:
In User Map Edit mode or Manual Update mode
Rotate the trackball to move the cursor on upper part of screen. The following Chart Edit menu
will be displayed at the top of the screen.
To Next Page
Loading...
