7 Tools and Setting/Serviceman Menu
7-18
7.13 Code Input
By inputting a regulated code on “Code Input” panel, the enhanced menu is displayed. As other functions,
"Navigation and Planning" can be ended.
1) In the normal menu
Select [(7) Main] - [(5) Code Input] in that order.
The [Code Input] dialog box will be displayed.
2) Input the regulated code to the input column, and push [OK] button. Then, “Code Input” panel is
closed, and operation corresponding to a regulated code is done. When inputting the
deregulated code, “Code Input” panel is closed with nothing done.
* A typing in character is displayed with "*"
Regulated code and the operation
Input Code Function
0 “Serviceman” menu (for engineer) is displayed on Menu Title Bar.
(Original menu is disappeared on this operation. To display original menu, select
[Serviceman]-[Exit Serviceman Menu].)
* Please do not operate the serviceman menu excluding JRC serviceman.
The device might not work correctly when the setting is changed.
3) To close “Code Input” panel, select “Cancel” button.
To Next Page
Loading...
