JRC JCY-1800 - System Status Data Files; Extract Setup File from SysInfo.dat

7. Error Display
JCY-1800/1850 VDR/S-VDR Installation Guide
106
DOC No. 7ZPJD0387C
Table 7-2: The conversion table of a code and equipment
A connection channel is displayed when the equipment which is not defined by the following table is connected.
The codes from 01 to 32 identify connection channel. (S-VDR: 01 to 16)
ALARM DETAIL
SYSYTEM CODE
Equipment
6 0 / 1 4 1
GPS
4 2
AIS
4 3
Speed Log
4 4
Gyro Compass
4 5
Auto Pilot
4 6
Rudder Angle Indicator
4 7
Echo Sounder (Bow)
4 8
Anemometer
4 9
Engine Telegraph
5 0
M/E Remote Control System
5 1
ECDIS
5 2
Thruster
5 3
Bow1 Thruster
5 4
Bow2 Thruster
5 5
Stern1 Thruster
5 6
Stern2 Thruster
5 7
Hull Stress Monitor
5 8
Radar
5 9
Echo Sounder (Stern)
6 0
Digital Signal Converter 1 (VDR option unit)
6 1
Digital Signal Converter 2 (VDR option unit)
6 2
Digital Signal Converter 3 (VDR option unit)
6 3
Digital Signal Converter 4 (VDR option unit)
6 4
Digital Signal Converter with optional A/D Converter 1 (VDR option unit)
6 5
Digital Signal Converter with optional A/D Converter 2 (VDR option unit)
6 6
Digital Signal Converter with optional A/D Converter 3 (VDR option unit)
6 7
Digital Signal Converter with optional A/D Converter 4 (VDR option unit)
6 8
NAV-I/F unit (VDR option unit)
6 9
Spare
7 0
NSK unit (NCT-27)
7 1
Main GPS and Sub GPS with Switcher
7 2
Sub GPS (connection with a CH different from the Main GPS)
7 3
Magnetic Compass
3 3
NSK board (VDR option unit) for Heading
3 4
NSK board (VDR option unit) for Ship speed