JRC JCY-1800 - Page 175

14. Maintenance Check List
JCY-1800/1850 VDR/S-VDR Installation Guide
165
DOC No. 7ZPJD0387C
No. Check items Check Name of check person Modification operations Remark 1.2 Installation position
The installation position of each composition units is filled in ( ).
1) PCU (
)
2) CB (
)
3) RCU (
)
4) OPU (
)
5) MIC1 (
)
6) MIC2 (
)
7) MIC3 (
)
8) MIC4 (
)
9) MIC5 (
)
10) MIC6 (
)
11) MIC7 (
)
12) MIC8 (
)
13) MIC9 (
)
14) DSC1 (
)
15) DSC2 (
)
16) DSC3 (
)
17) DSC4 (
)
18) NAV (
)
19) RIF (
)
Horizontal line is drew in ( ) of the unit not contained in composition. The existence of an Analog Converting Board is filled in by DSC. A microphone unit fills in waterproofing or un-waterproofing. OPU shall install at the Wheel House RIF shall install near the RADAR Display Unit.
1.3 Installation situation
Installation situation of each composition unit is checked.
1) Is it fixed firmly? 2) Is waterproofing processing of PCU OK? 3) Is waterproofing processing of CB OK? 4) Is waterproofing processing of WPMIC OK?