2. Installation Procedures
JCY-1800/1850 VDR/S-VDR Installation Guide
32
DOC No. 7ZPJD0387C
FGB
2
Set the FGB (CKA-137) to the slot.
Screw the two screws to fix the FGB.
R: Red
G: Green
B: Blue
H: Gray
V: Black
3
Connect the RGB cable to the five BNC connectors on the backside of frame.
Caution) The cable of an assignment color is connected to the appointed location.
R: Red G: Green B: Blue H: Gray V: Black
BNC connector frame
Three screws
4
Install the BNC connector frame with three screws.
Screw the three screws.
To Next Page
Loading...
