JRC JCY-1800 - Operation Buttons; File Menu Functions

4. Cabling
JCY-1800/1850 VDR/S-VDR Installation Guide
84
DOC No. 7ZPJD0387C
12
Untwist the core wires and straighten each wire.
13
After straightening, arrange the core wires so that the
wires are aligned in the wiring order.
NOTE: Above picture shows the order of “Wiring A.”
14
A pin number is 1 to 8 in an order from the left.
1 2 3 4 5 6 7 8
W/G G W/O Bl W/Bl O W/Br Br
Tx+ Tx- Rx+ Rx-
15
Gather all the core wires with maintaining the order.
16
Cut off the core wires at 16mm from the sheath.
Useful tip: First, cut them 1 to 3 mm longer. Then,
adjust by inserting the connector.
Green
White/
green
Blue
White/
blue
White/
orange
Orange
White/
brown
Brown
Orange Blue Green
Brown
White/
orange
White/
green
White/
blue
White/
brown
Wiring
A
Wiring B