4. Cabling
JCY-1800/1850 VDR/S-VDR Installation Guide
85
DOC No. 7ZPJD0387C
17
Insert the core wires into the STP connector. Check
that the leading edges of the wires reach to the
connector edge.
NOTE: Also check that the foil and the drain wire are
touched to the metal part inside the connector.
18
A pin number is 1 to 8 in an order from the left.
19
Calk by a calking tool.
20
Cut off the unnecessary foil and drain wire by scissors.
To Next Page
Loading...
