Chapter9 Appendix
VDR Real Time Monitor / Installation Manual
121
(5)Delete the current script file by the “delete” command as follows.
(6)To send the changed script file, input the “load” command as follows.
(7) Select menu in order of "Transfer" and "Send File", and the following screen is indicated.
Click the [Browse] button, and select the changed “18firon.cfg” file, and click the [Send] button
to transfer.
(8) To validate the”18firon.cfg” file, input the “set” command as follows.
Manager vdr_if> load method=zmodem asyn=0 destination=flash Enter
Router ready to begin ZMODEM file transfers . . .
･B000000023be50
Info (1048293): ZMODEM, session over.
Manager vdr_if> load method=zmodem asyn=0 destination=flash Enter
Router ready to begin ZMODEM file transfers . . .
Manager vdr_if> set config=18firon.cfg Enter
Manager vdr_if> delete file=18firon.cfg Enter
To Next Page
Loading...
