Chapter6 PC (Server/Client) Setup
VDR/S-VDR Real Time Monitor / Installation Manual
44
(3) Reading of the VDR configuration.
Server and Client PC）
Eject a CF card from VDR/S-VDR, and insert it into the CF card slot of used PC.
Then, to import VDR/S-VDR configuration data, select the “SysInfo.dat” file in the
CF card and click the [Import] button. CF card drive changes with PC of use.
*:
\Init\SysInfo.dat
CF card drive
Caution
When a CF card is ejected from the VDR/S-VDR, please be sure
to follow the operation of “9.1 How to eject CF card from
VDR/S-VDR”.
The CF card may be damaged and record may not be available.
Import button
To Next Page
Loading...
