Chapter9 Appendix
VDR Real Time Monitor / Installation Manual
75
STEP 4 Set IP Address of Client PC
Open the properties screen of Internet protocol (TC/IP) in the Windows control panel, and set
the following IP address to the Client PC.
・IP Address
Client1=192.168.0.250
Client2=192.168.0.249
Client3=192.168.0.248
・Subnet Mask =255.255.255.0
It is not necessary to set Default gateway for the VDR/S-VDR Real Time Monitor.
And then set the Client PC in accordance with the “6.2 Setup Items of PC”.
IP Address
/Subnet Mask
To Next Page
Loading...
