EasyManua.ls Logo

JRC JCY-1800 - Playback Software Details; Checking Recorded Data

JRC JCY-1800
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10. Playback
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
120
DOC No. 7ZPNA4014
10.2. Playback Software
The Launcher of Playback software starts.
The recorded data of VDR/S-VDR are saved on the Capsule and the CF card.
It is necessary to play back and check these both.
1) Capsule
The recorded data is downloaded from the Capsule to a maintenance PC via LAN.
2) CF card
The recorded data is copied from the CF card to a maintenance PC with card adaptor.
Check the recorded data of both a capsule and CF card at the end of installation.
Operating procedures is different with a capsule and CF card.
Play back the recorded data with reference to the procedure after the following page, and check the data.
Refer to the instruction manual of Playback software for details
10.3. Check recorded data
The recorded data is checked as follows:
Check that all NMEA sentences are recorded.
Check that radar images are recorded.
Check that selected radar images are recorded in two radar connection system.
Check that conversation in a bridge and wings is recorded
Check that communication of a VHF transceiver is recorded

Table of Contents

Other manuals for JRC JCY-1800

Related product manuals