JRC JCY-1800 - Page 134

11. Frame Grabber Board (CKA-137) setup - FGB utility -
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
128
DOC No. 7ZPNA4014
11.3.2. Horizontal position tuning
If the captured image shifted horizontal, tune the Horizontal position. If the captured image large shifted, tune by the
mouse. If the small shifted, tune by the manual.
11.3.2.1. By the mouse
a) Click the [Tuning (T)] -> [Horizontal POSI. Mouse] menu.
The following message appears.
b) Click the [OK] button on message box.
Automatically capture the image, and the following message appears.
c) Click the [OK] button on message box.
Message box disappear.
d) Click the horizontal edge of the image. Don’t care the Y coordinates.
The following message appears.
Click the horizontal edge of the image.