1. Maintenance Software
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
1
DOC No. 7ZPNA4014
1. Maintenance Software
The maintenance software of JCY-1800/1850 is a PC-based application. It serves the purpose of configuring and
inspecting the product at the factory. On board the ship, it helps users to install the JCY-1800/1850, settings, operational
check, and to find the causes of malfunctions, if any.
1) Software name:
JCY1800-maint.exe
2) Language used for display:
English
3) Characters used for entry:
English one-byte characters only
The number of characters that can be inputted is limited by each entry field.
Any character over the maximum allowable number is rejected.
4) Installation of the maintenance software:
Use “setup.exe” for installing this software to the maintenance PC.
Refer to Paragraph 16 for the installation method of this software.
5) OS:
Windows Xp
6) PC:
Minimum requirements for a lap top PC:
•CPU:
1GHz or more
•Memory:
512Mbytes or more
•PCMCIA card slot:
CF card as a data backup medium of VDR/S-VDR (attached a card adapter to the RCU)
•Communication I/F:
Ethernet (10/100Mbps)
•Screen resolution :
1024×768 (XGA) or more
•Display font :
Small size font
7) Personal Firewall
In using the personal computer which enables the personal firewall function, use the maintenance software after
disabling it.
Personal Firewall
A personal firewall is a filtering facility of LAN communication link attached to OS (Windows Xp) and the
software for a virus countermeasure.
When a personal firewall is enable.
The VDR/S-VDR becomes impossible to communicate to the maintenance PC by a firewall function.
8) Other requirements for maintenance:
LAN cable (Builds in the RCU.)
→Makes LAN connection from the Maintenance PC to the HUB unit of the RCU.
To Next Page
Loading...
