JRC JHS-180 - 5.3.5 Group Ship Setting; Group Ship Management

5-25
5.3.5 Group Ship Setting
“Group Ship List” can be displayed by pressing [5] in the “Main Menu”.
Ten MMSI can be registered for own group as maximum.
(“Group Ship List”)
ＧＲＯＵＰ ＳＨＩＰ ＬＩＳＴ ＵＴＣ１１：４３
ＮＡＭＥ ＭＭＳＩ
ＮＩＨＯＮＭＡＲＵ２ ４３１０００００２
ＮＩＨＯＮＭＡＲＵ３ ４３１０００００３
ＮＩＨＯＮＭＡＲＵ５ ４３１０００００５
ＳＹＯＷＡＮＩＨＯ＞ ４３１０００００４
ＤＥＬ ＡＬＬ＞
ＮＩＨＯＮＭＡＲＵ１ ４３１０００００１
○
○
○
○
ＩＮＳ＞
ＤＥＬ＞
ＢＲＧ ： ＲＡＮＧＥ ＮＡＭＥ／ＭＭＳＩ
２７０°： ０．１８ＮＭ ＪＲＣ ＭＡＲＵ１
３５°： ０．２９ＮＭ ＪＲＣ ＭＡＲＵ２
２２°： ０．９２ＮＭ ＪＲＣ ＭＡＲＵ１
Pressing up-arrow key or down-arrow key selects ship.
Pressing [ENT] confirms the selected ship to edit the registry.
5.3.5.1 Ship Name
ＧＲＯＵＰ ＳＨＩＰ ＬＩＳＴ ＵＴＣ１１：４３
ＮＡＭＥ ＭＭＳＩ
ＮＩＨＯＮＭＡＲＵ２ ４３１０００００２
ＮＩＨＯＮＭＡＲＵ３ ４３１０００００３
ＳＹＯＷＡＮＩＨＯ＞ ４３１０００００４
ＳＨＩＰＮＡＭＥ ＥＤＩＴ
Ｂ
↑ＡＢＣＤＥＦＧＨＩＪＫＬＭ↑↓
ＮＯＰＱＲＳＴＵＶＷＸＹＺ←→
↓． ０１２３４５６７８９＊
ＥＸＩＴ＞
○
○
○
○
ＢＲＧ ： ＲＡＮＧＥ ＮＡＭＥ／ＭＭＳＩ
２７０°： ０．１８ＮＭ ＪＲＣ ＭＡＲＵ１
３５°： ０．２９ＮＭ ＪＲＣ ＭＡＲＵ２
２２°： ０．９２ＮＭ ＪＲＣ ＭＡＲＵ１
The cursor appears in the “Ship Name” field and keypad appears in the display.
Pressing arrow keys move the cursor on the keypad in the display.
Pressing [ENT] input one letter from the keypad to the “Ship Name” except following cursor
position.
Pressing [ENT] at the next cursor position of “9” on the keypad closes the keypad.
Pressing [ENT] at the arrow position on the keypad moves the cursor in the “Ship Name”.
Pressing [ALM/CLR] deletes one letter on the cursor in the “Ship Name”.
5.3.5.2 MMSI
The cursor appears in the “MMSI” field.
Pressing numerical key inputs the number of “MMSI”.
Pressing [ALM/CLR] quits the inputting and returns to “Group Ship List”.
Pressing [ENT] entries the inputted number and returns to “Group Ship List”.
Pressing this select key inserts a new ship‘s
registry before the selected ship.
Pressing this select key deletes all registries as
group.
Pressing this select key deletes the selected
ship‘s registry.
Pressing this select key closes the keypad and
moves the cursor to the “MMSI” field.