JRC JHS-800S - Setting of the Controller Start

Settings & Registrations
5-16
5.6.3 Setting of the controller start
When the external power is supplied to the main unit, the main unit is turned on automatically.
This menu sets whether the controller is turned on at once with the main unit then, or the controller
returns to the previous state of just before turned off.
■ Procedure ■
1
1
1
.
.
.
From the main menu, touch the [SETUP] →[DISP
SET]→ [CTLR START] buttons.
Enter the setting as follows.
To turn on with the main unit: ON
To return to the previous state: OFF
2
2
2
.
.
.
After the setting is complete, touch the [✓] button
to save it.
This function is the individual for the controller and cannot be displayed on the
main unit.
Note