9-9
A110 NORMAL
ES ALARM TEST
4.2.6.3 Menu A140 Power supply low
This menu shows status of the echo sounder Power supply low test
(transmitter power). If the code is active it can be acknowledged by
pressing ENTER.
A140 NORMAL
POWER SUPPLY LOW
4.2.6.4 Menu A201 SOG Simulation
This menu shows status of the SOG simulation code (active when menus
T1–T4 for SOG simulation is enabled). If the code is active it can be
acknowledged by pressing ENTER.
A201 NORMAL
SOG SIMULATION
4.2.6.5 Resserved
4.2.6.6 Menu A210 SOG Phase roll
This menu shows status of the SOG phase roll test. If the code is active it
can be acknowledged by pressing ENTER.
A210 NORMAL
SOG PHASE ROLL
4.2.6.7 Menu A220 SOG Sig Balance
This menu shows status of the SOG signal level balance test. If the code
is active it can be acknowledged by pressing ENTER.
A220 NORMAL
SOG SIG BALANCE
4.2.6.8 Menu A230 SOG Transmitting failure
This menu shows status of the Transmission supervision test (active when
the test fails). If the code is active it can be acknowledged by pressing
ENTER.
A230 NORMAL
SOG T2T fail
To Next Page
Loading...