JRC JLR-7700MKII - COURSE DEVIATION IND. Screen; Switching the CDI Meter Scale; Switching the Display on the Two Bottom Lines

47
JLR-7700 MK2 GPS Navigator
Next Destination number
Bar graph showing the
course deviation
Speed over ground
Destination to the bearing angle
Local time
Distance to the destination
Switching of the CDI
meter scale
( 0.1nm 0.3 nm)
Switching the two bottom lines
(CRS/SPD/TTG/XTE)
(CMG/VAR/VTD)
{
Time to go to the destination
Course deviation and
steering direction
L : Steer to the left
R : Steer to the right
Current position
(Pressing the or key
will change the display
to the loran time difference)
Course over ground
(Magnetic bearing)
4.3.2 COURSE DEVIATION IND. Screen
The following operations can be made on the COURSE DEVIATION IND. screen besides those under the
items 4.3.1.1 “Setting a Destination” and 4.3.1.5 “Storing the Current Position”.
4.3.2.1 Switching the CDI Meter Scale
The CDI meter scale can be switched by pressing the RNG key.
(Switching from 0.1 NM to 0.3 NM and vise versa.)
4.3.2.2 Switching the Display on the Two Bottom Lines
The contents of the display in the two bottom lines can be switched by pressing the ALT key.
Switching between “CRS/SPD/TTG/XTE” and “CMG/VAR/VTD”. (See the terminology shown below)