JRC JMA-5106 - Attaching a Power Cable (CFQ-6911-5)

126
9.3.7 Attaching a power cable (CFQ-6911-5)
A power cable of 5m length with a connector is attached to this radar equipment.
Color
Number of element wires/
diameter (mm)
Cross section
(mm
2
)
Polarity
Red 50/0.18 1.25 +
Red 50/0.18 1.25 +
Red 50/0.18 1.25 +
Black 50/0.18 1.25 −
Black 50/0.18 1.25 −
Black 50/0.18 1.25 −
CFQ-6911-5 cable
Cable length 5m
Cable process method
1. Crimp three black cables
together.
2. Crimp three red cables
together in the same way.
3. Crimp the shielding cable.
4. Install the red cables o
n
the + side of the ship's
power supply, the blac
k
cables on the - side of the
ship's power supply, an
d
the shielding cable in the
hull's earth.