ņ73
[VII] Loading target tracks from CARD2 (Card2 Track Display)
Target tracks saved in CARD2 can be loaded.
Procedure 1 Insert a Flash memory card into the
card slot.
Refer to the attached instruction manual for how
to insert/remove the card.
2 Press the [TT menu] key.
3 Press the following buttons.
4 Target Track Setting
7 Card2 Track Display
4 Input the number of track and press the
[ENT] key.
Data of the selected track number is loaded and
displayed on the radar screen.
To Next Page
Loading...
Need help?
General
