JRC JMA-9172-SA - Page 388

8－14
JMA-9172-SA Instruction Manual > 8.COUNTERMEASURE FOR TROUBLE ... > 8.4 REPLACEMENT OF MAJOR PARTS
Work of Starboard side
5) Remove the screws (two M4
screws) and the bolts (six M5
bolts) of the radar process unit.
6) Pull the radar process unit to the
open-position.
7) Loosen the M4 screw.
8) Hook the stopper in the insertion
hole.
Bow
Loosen the Ｍ4
Stopper
Insertion hole
Remove the six M5 bolts
Remove the two Ｍ4
Starboard side
Radar process unit
Bow