JRC JMR-5425-7X - Adjusting to Optimal Images (Selection of Observation Scenes)

5-11 Section 5 Basic Operation of the Radar
1
2
3
4
5
5
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
5.3.7 Adjusting to optimal images (Selection of
observation scenes)
To obtain optimal images, it is necessary to understand the features of radar signal processing settings
and perform adjustment according to the sea condition. When adjusting all setting values manually,
such adjustment may sometimes difficult even for experienced operators.
Thus, signal processing settings suitable for general usage are preset in the observation scene
selection function at the time of factory shipment. In many cases, optimal images can be obtained
quickly by selecting the observation scene corresponding to the current sea condition.
1 Click on the Observation Scene Selection button at the bottom of the Top screen.
The [Observation Scene Selection] dialogue is displayed.
2 Select the observation scene corresponding to the current sea condition
Refer to the following table about the definitions of observation scene.
Memo
Some items are not displayed according to the equipment setting differences.
Observation Scene
Selection button