JRC JMR-5425-7X - Setting up the Display of Own Ships Tracks

Section 11 Setting up Screen View 11-4
11.1.2 Setting up the display of own ship’s tracks
Configure the settings for own tracks. The own ship’s track dialogue comprises the [Display] tab, the
[Plot] tab, and the [Clear] tab. Information of own tracks is recorded in the SSD at intervals in
accordance with the settings. Information of a maximum of 20,000 points (When the plotter option is
available, maximum of 1,000,000 points) are displayed on a chart as own tracks.
[Operation procedure]
Open the own ship’s track display setting screen by performing the following menu operations.
[Menu] button → View → Own Track
[Display] tab
The following table shows the description of the item that is set on the [Display] tab.
Setting Item Description of Setting Setting Value
Own Track Display Switch the display of own ship’s track to
On/Off.
On: Displays own ship’s track.
Off: Hides own ship’s track.
[Plot] tab
The [Plot] tab can be selected only when the [Own Track Display] on the [Display] tab is set to On.
The following table shows the descriptions of the items that are set on the [Plot] tab.
Setting Item Description of Setting Setting Value
Track Type Set the type of the own ship’s track.
Only Standard can be selected.
Standard
Plot Colour Set a colour of the own ship’s track.
This is in conjunction with own symbol
colour.
The colour that was selected
from [Settings]-[Colour and
Brightness]-[Own Symbol / HL
/Vector]
Plot Interval Set a plot interval.
A time or a range can be used to set the
interval.
Off / 3 s / 5 s / 10 s / 30 s /
1 min / 3 min / 5 min / 10 min /
30 min / 60 min / 1 NM / 3 NM /
5 NM / 10 NM /
0.1 NM / 0.2
NM / 0.3 NM / 0.5 NM
Time Label
Display/hide a time label interval.
Display: Select / Hide: Clear
Plot Interval Set a time label interval when [Time Label]
is selected.
1 min / 3 min / 5 min / 10 min /
30 min 60 min
File Load/Save Display the dialogue by selecting [Tools] –
[File Manager] – [File Load/Save].
-
[Clear] tab
The [Clear] tab can be selected only when [Own Track Display] on the [Display] tab is selected.
The following table shows the descriptions of the setting of the [Clear] tab.
Setting Item Description of Setting Setting Value
Track Colour Specify a colour of the own ship’s track to be
deleted. Only [All] can be selected.
All
Clear Execute the deletion of the tracks of the colour
that was specified in Track Colour.
-
File Load/Save Display the dialogue by selecting [Tools] – [File
Manager] – [File Load/Save].
-