Section 13 Setting up the Operation Mode 13-14
13.9 Setting Own Ship's Dynamic Trait
Set dynamic traits of own ship.
[Operation procedure]
Open the own ship’s dynamic trait setting screen by performing the following menu operations.
[Menu] button → Settings → Ship's Dynamic Trait
Setting Item Description of Setting Setting Value
Reach Set up the distance to reach the turn. 0 to 2000 m
Turn Mode Set up the Turn mode. Radius / Rate
Radius Enter the radius of the turn rate.
This item is displayed when [Radius] is selected
in the [Turn Mode] combo box.
0.10 to 2.00 NM
Rate Enter the speed of the turn rate.
This item is displayed when [Rate] is selected in
the [Turn Mode] combo box.
20 to 720°/min
Acceleration Enter the rate of change of speed (acceleration)
of own ship's dynamic trait.
0.0 to 100.0 kn/mir
Deceleration Enter the rate of change of speed (deceleration)
of own ship's dynamic trait.
0.0 to 100.0 kn/mir
To Next Page
Loading...
