Section 8 Functions of the ECDIS (Option) 8-20
Note
The display will be in gray without displaying a chart when a corresponding chart does not exist in
the display area, when a chart exists with only a part of data, or when the display scale does not
match the chart scale. In this case, change the scale to check for a chart can be displayed.
8.5.2 Customizing object display
When the [Custom] button of the Chart Information Area is clicked on, the object corresponding to the
setting in the [Chart Display] dialog is displayed.
Any of the objects that are displayed on the [Chart Display] dialog can be set.
1 Click on the [Custom] menu display button.
The display changes as follows.
[Custom] button
"All (All display)" Example
To Next Page
Loading...
