Section 9 Route Planning 9-30
9.6.4.3 Dividing a leg
A leg can be divided by setting a longitude or a nautical mile.
1 Click the right button on the WPT No. to be divided.
The context menu is displayed.
2 Click on [Divide leg...] of the context menu.
The [Divide Route] dialog box appears.
3 Enter a division interval.
[Every (LON)] (Longitude division)
1) Click on "Every(LON)".
2) Enter a longitude interval for division.
[Every(NM)] (Nautical mile division)
1) Click on "Every(NM)".
2) Enter a nautical mile interval for division.
4 Click on the [OK] button.
The leg that is selected in Step 1 is divided in the unit that is specified in Step 3.
Note
When the total number of WPTs exceeds the maximum value of 511 as a result of leg division, leg
division is executed within the range of 511 in the entire route.
9.6.4.4 Copying the entire route
Copy the entire route that is selected.
1 Click the right mouse button on the WPT No. other than the last WPT.
The context menu is displayed.
2 Click on [Copy route] on the context menu.
The entire route is copied.
To Next Page
Loading...
