JRC JMR-7210-6X - Saving an Alternate Route; Overwriting Without Changing the File Name

Section 9 Route Planning 9-62
4 For table editing, edit the route by using the same procedure as that from Step 3 of
“9.6.4 Editing a route by table editing”.
5 For graphic editing, click the right mouse button on the WPT or leg of the route that is
being monitored.
The context menu is displayed.
6 Click on [Planning WPT] or [Planning LEG] of the context menu.
The context menu for editing WPT or leg is displayed.
7 Edit the route by using the same procedure as from Step 3 of “9.7.3 Editing a route by
using graphic editing”.
9.8.2 Saving an alternate route
9.8.2.1 Overwriting without changing the file name
1 Click on the [Save] button.
A confirmation dialog is displayed.
2 Click on the [YES] button.
The alternate route is displayed and used instead of the original route.