10-13 Section 10 Route Monitoring
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
[Distance] Dialog
[1] [From]
Selects a starting point calculation method and enters the values.
[2] [To]
Selects an ending point calculation method and enters the values.
[3] [Distance (Result)] (Distance calculation result)
Displays distance from the starting point and ending point that were obtained from the setting.
10.4.1 Calculating a schedule
1 Click on the [Schedule] button.
2 Click on the [Destined WPT] combo box.
3 Click on the WPT number whose schedule is to be calculated.
The measured distance from the own ship to the selected WPT, the estimated required time
calculated based on the SOG (Speed Over the Ground), and the estimated time of arrival are
displayed.
To Next Page
Loading...
