JRC JMR-7210-6X - Searching a Chart with the Chart Name; Absence;Expiration of the C-MAP Chart License; Displaying Selected Chart Only

14-83 Section 14 Creating a User Chart/ Updating a Chart Manually
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
14.8.2.3 Searching a chart with the chart name
1.
Enter a chart name in the search box on the [Select Chart] dialog box.
The applicable chart is displayed.
Memo
To clear the search result, clear the input in the search box.
14.8.2.4 Absence/expiration of the C-MAP chart license
When C-MAP is targeted for manual update and the C-MAP that is selected from the chart list does not
have any license or the license has expired, the chart is not selected and the following dialog is
displayed.
Close the dialog by clicking on the [OK] button or the [] button and select another chart.
14.8.3 Updating a chart manually
1. Create/edit an object on the chart by using map creation tools.
(Refer to 14.9 How Use a Map Creation Tool (at Manual Update).)
2. Delete an object or change the properties as required.
(Refer to 14.10 Creating an Object.)
3. Click the [Save] button.
The manually updated object is saved in the chart.
14.8.4 Displaying selected chart only
1. Select a chart to be displayed according the procedure that is described in “12.8.2
Selecting a chart to be updated”.
2. Set the [FIX] (fixing the chart) on the Manual Update tool bar to ON.
ON OFF
Memo
For the C-MAP chart or the ARCS chart, the [FIX] button cannot be set to ON.
[] (Close) button
[OK] button