Section 18 Setting up the Operation Mode 18-4
18.2 Basic Settings for Radar Signal
Processing
Select [Signal Process (Basic)] in the classification pane.
Set a basic processing method of radar signals in the setting dialog of the edit pane (ECDIS screen
only).
Setting Item Description of Setting Setting Value
Gain Rotate the dial to set the mode to the
receiving sensitivity adjustment
mode.
0 to 100
Sea (sea clutter
adjustment)
Rotate the dial to set the mode to the
sea clutter adjustment mode.
By clicking on the dial in adjustment
mode or clicking on the button next to
the slider, the mode can be switched
between manual (MAN) and
automatic (AUTO).
0 to 100
MAN: Manually removes sea clutters.
AUTO: Automatically removes sea
clutters.
To Next Page
Loading...
