Section 8 Functions of the ECDIS (Option) 8-30
8.9 Selecting an ARCS chart
This section describes chart selection and the functions on the display, which are available on the
ARCS chart.
8.9.1 Selecting charts from all
You can select desired charts from all the charts stored in this system.
1 Click on the [Select] button in Chart Information Area.
The [Select Chart] dialog box appears.
2 Select the desired chart in the list by clicking it and then click on the [OK] button.
The selected chart is displayed on the screen.
[OK] button
Chart selection button
To Next Page
Loading...
