JRC JMR-9272-S - Creating a Circle, Ellipse, and an Arc (Line Object)

14-95 Section 14 Creating a User Chart/ Updating a Chart Manually
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
5. Place the EBL/VRM marker on the 2
nd
vertex and click the button.
A vertex is created on the position on which the button was clicked and the information is
reflected in the object property dialog box. (Refer to "14.2.8
Object property dialog box".)
The EBL/VRM marker is reset to the EBL/VRM reference point cursor.
6. Adjust the parameters on the object property dialog box.
7. To create an object on another position continuously, repeat Steps 2 to 6.
14.10.3 Creating a circle, ellipse, and an arc (Line
object)
A circle, an ellipse, and arc can be drawn with the cursor by specifying the center.
1. Click on the [Type] button on the drawing toolbar.
An icon list is opened.
2. Select an icon of a circle, an ellipse, or an arc.
(Refer to "14.2.3
Selecting an object type".)
3. Click on the position for the center with the cursor.
The center is created and the property information on the vertex is displayed on the object
property dialog box.
2
nd
vertex