CONFIGURATION AND SPECIFICATIONS
1-8
(3) Printer (NKG-91)
Printing system Thermal line dot
Communication interface RS-232C, 4.8/9.6/38.4 kbps
Data control RTS/CTS
Data buffer 4096 byte
Maximum print speed 20 mm/sec or more
Roll paper width 58 mm
Power supply voltage 6.5 VDC (5 VDC to 8.7 VDC)
Current consumption Maximum 2 A
(4) Printer (DPU-414)
Printing system Thermal serial dot
Communication interface RS-232C, 4.8k/9.6k/38.4kbps
Data control HW busy
Data buffer About 28kbyte
Maximum print speed 52.5cps
Roll paper width 112mm
Power voltage 6.5VDC
Current consumption Maximum 2A
(5) Printer (NKG-800)
Printing system Serial impact dot matrix
Communication interface Centronics compliant
Supported fonts ANK FX850 mode : 324 characters
IBM Proprinter II mode : 264 characters
Paper feed system Roll paper holder
Paper type 209 - 216 mm (8.23 - 8.50") roll paper
Buffer size ANK FX850 mode : 21 kbytes
IBM Proprinter II mode : 9.3 kbytes
Density adjustment Manual (nonstepped)
Power supply voltage 10.2 VDC - 31.2 VDC
Power consumption Maximum 35 W
To Next Page
Loading...
