JRC JSS-2150 - Printer (NKG-900)

Options Operation
10-11
10.7 Printer (NKG-900)
CAUTION
The print head of the NKG-900 printer may be very hot after printing. Do
not touch the print head of the printer. Make sure that the print head is cool
before replacing the paper or cleaning the print head.
Do not use the NKG-900 printer if there is no ink ribbon cartridge or paper.
Do not twist the ink ribbon when installing the ink ribbon cartridge.
To avoid malfunction, do not use the paper feed knob during power on.
Before opening and closing the cover of the NKG-900 printer, turn off the
printer. Wait more than 2 seconds after turning the printer off before turning it
back on again so it can initialize correctly.
(NKG-900 of the cover opened)
Power switch
Operation panel
Roll paper cover
Roll paper
Roll paper stand
Roll bar
Passes through the
printing roll paper.
Roll paper cutter
Paper feed knob
Friction lever
When replacing the roll
paper, pull this lever
toward the front before
inserting the paper, and
return it towards the back
after paper is inserted.
Printer cover
Print head
Contacts the roll
p
a
p
er for
p
rintin
g
.
Roll support cover
Prevents printed roll
paper from being
wound back in.