Names and Functions
2-1
2. NAMES AND FUNCTIONS
2.1 Controller (NCM-2150)
The controller parts and their functions are described below.
1. Internal loud speaker
2. Jack for telegraph in continuous wave (CW) mode
3. Black and white liquid crystal display unit
4. Numeric keypad (10-key) and function keys
In addition to entering numeric values, when combined with the
FUNC key, the keys have the following functions.
･ TEL ꞏꞏꞏ Sets TEL mode with the last or default frequency.
･ DSC ꞏꞏꞏ Sets DSC mode with the last or default frequency.
･ CW ꞏꞏꞏ Sets CW mode with the last or default frequency.
･ 1CLAR ꞏꞏꞏ Displays the setting screen for the clarifier.
･ 2SCAN ꞏꞏꞏ Displays the scan menu.
･ 3NR ꞏꞏꞏ Displays the setting screen for noise reduction.
･ 4ATT ꞏꞏꞏ Displays the setting screen for attenuation.
･ 5AGC ꞏꞏꞏ
Displays the setting screen for automatic gain control.
･ 6SP ꞏꞏꞏ Turns speaker on or off.
･ 7PRN ꞏꞏꞏ Prints the specified screen.
･ 8TEST ꞏꞏꞏ Displays the self-diagnosis menu.
･ 9 ꞏꞏꞏ Switches Tx power between high and low.
･ 0 ꞏꞏꞏ Displays the DSC test call menu.
･ FUNC ꞏꞏꞏ
Enables 10-key functions or changes an active screen.
PWR
RDC
TEST
CALL
1
4
5
14 6 7 8 9 10 11 12 13
2
3
15
16
To Next Page
Loading...
