JRC JSS-2500 - BAM Alert Sound

Maintenance & Inspection
6-11
6.3.5 BAM alert sound
In the case of Warning alert, two short audible signals will sound as shown below.
Alert ID Alert title
BAM alert sound
(Two short audible signals)
3008 TX POWER: FAIL 1000Hz(100msec) / 1000Hz(100msec)
3015 ANTENNA: TUNER 1000Hz(100msec) / 1000Hz(100msec)
3122
DISTRESS: RX 2200Hz(100msec) / 1300Hz(100msec)
DISTRESS: RELAY 2200Hz(100msec) / 1300Hz(100msec)
URGENCY: RX 2200Hz(100msec) / 2200Hz(100msec)
 The BAM alert sounds about 3 seconds after the alert is detected.
 The BAM alert with State V (Active unacknowledged) sounds every minute.
 Caution Alerts do not sound an alert.