Jan 8, 2005
- 8 -
(20) Fix the breaker with four M3X6-screws on the Breaker Bracket contained in the
Breaker Addition Kit.
(21) Check the Open/short circuit of each DC terminal by a Circuit Tester.
Check Item Normal Condition
No.3 and No.4 Short
No.3 and No.5 Open
No.3 and No.6 Open
No.4 and No.5 Open
No.4 and No.6 Open
No.5 and No.6 Short
(22) Connect the cables disconnected in the (2) paragraph to the battery and confirm the
voltage outputted from the battery between No.3 and No.5 of the DC terminal.
(23) Turn on the breaker and check the voltage between 24V (+) and 24V (-) breaker
terminals as the same value with the battery voltage confirmed above.
24V (-)
24V (+)
To Next Page
Loading...
