JRC JSS-296 - Page 186

Jan 8, 2005
- 7 -
(19) Fix the the Breaker Bracket with two S4 X 10-screws to the bracket.
(20) Fix the Breaker with four M3X8-screws on the Breaker Bracket contained in the
Breaker Addition Kit.
(21) Check the Open/short circuit of each DC terminal by a Circuit Tester.
Check Item Normal Condition
No.3 and No.4 Short
No.3 and No.5 Open
No.3 and No.6 Open
No.4 and No.5 Open
No.4 and No.6 Open
No.5 and No.6 Short
(22) Connect the cables disconnected in the (2) paragraph to the battery and confirm the
Breaker Bracket