JRC jue-87 - Scheduled Transmission Setup

3-66
3.8.9 Scheduled Transmission
JUE-87 can send position information, file, and/or data from data source to a designated party in
regular interval.
Up to 5 schedules can be registered.
Step Operation IME/DTE Response Remarks
1
Hold down
Alt key and press
U key on Main menu.
The “Set up” window is
displayed.
2 Move the cursor to the item
“Scheduled transmission”
then press
Enter key.
The “Scheduled transmission”
window is displayed.
3 Move the cursor to the item
you want to register then press
Enter key.
The “Scheduled transmission
parameter” window is
displayed.
See the example below.
4 Move the cursor to each item
to set and press
Enter key then
set each parameter.
5 After confirming each
parameter, to return to Main
menu, press
F10 (“Previous”)
key twice or ESC key.
Fig.3.8.9 Example of “Scheduled transmission” Window
starting date and Time
(yy-mm-dd hh:mm UTC) : 10-12-20 17:00
requesting Interval : 00:10
lEs : 002-111-210-302
Network type : Telex
Destination code &
subscriber’s number : 072-0223344
Character code : Ia5
data type qtH : oFf
dS : None
File name : 0: TEST.TLX
transMission : oFf
F9:Next F10:Previous
Scheduled transmission #1