JRC jue-87 - Handling Received Messages; Reading, Printing, and Saving Messages

3-69
3
3.9 Handling Received Messages (Read-out, Printing, Saving, and Deleting)
The received messages of Inmarsat-C and EGC, are printed out immediately when the MES receives
them, in the case of the automatic message print out function (see 3.5.3.) is turned on. They are erased
from older ones when stored calls exceed more than its maximum capacity, 100 calls, or 40K bytes. When
your JUE-87 stored over 90 calls, warning window is displayed (Fig.3.9g). If the numbers of calls exceed
100, the call logs are deleted from older ones. When you need to read out, print out, saving, or deleting
the messages, follow the below procedures.
(1) To read out, print out, and save the message
Step Operation IME/DTE Response Remarks
1
• Move the cursor to
“read Out” and press
Enter key.
• “Read-out” window is
displayed. It shows 3 types
of message list.
2
• Select the type of
message list you want
to see.
• The message list you have
chosen is displayed.
Each message list displays
received messages in
chronological order.
(The newest message is
displayed at the top of list.)
• “Inm-C”:
“Inm-C message list”
“Egc” :
“Egc message list”
“All” :
“reception message list”
(Received all messages )
• See Fig. 3.9a to 3.9c.
3
• Move the cursor to the
message you want to
read and press
Enter
key.
• The message you want to see
is displayed.
(See Fig. 3.9e)
• Press
F10 (“Previous”) key to
return to main menu when you
do not need to print out.
• Lower 2 lines show the
description of the
received message.
• Under line shows the
characters received in
error.
(See Fig. 3.9e)
4
• To print out the
message, press
F5
(“Print out”).
• The message is printed out.
• Press
F10 (“Previous”)
key to return to main
menu when you do not
need to save it.
5
• To save the message,
press
F6 (“save as”)
key.
• The “File name” is displayed.
6
• Enter the file name and
press
Enter key.
• Press F10 (“Previous”)
key to return main
menu.
• “Now saving data. Please
wait” is displayed
• Blank space cannot be
used for file name.
• Using received day for
file name, is convenient
for you.