JRC jue-87 - Setting of Fixed Area; Setting of Reception Type

3-96
3.13.3.2 Setting of Fixed Area
Step Operation IME/DTE Response Remarks
1
• Move the cursor to “egC”
and press
Enter key.
• The “EGC” window is
displayed.
2
• When you want to change
the fixed area, move the
cursor to the “Fixed area”
and press
Enter key.
• The cursor is moved to
the “Fixed area” area.
3
• Press the new “Fixed
area” and
Enter key.
• The new fixed area is
displayed and the cursor
is moved next to fixed
area.
4
• To return to Main menu,
press
F10 (“Previous”)
key twice.
• Main menu screen is
displayed.
• When you want to change
the other item, move the
cursor and press
Enter
key.
Fig.3.13.3.2 “EGC” Window
3.13.3.3 Setting of Reception Type
You can restrict below mentioned services at this menu.
･ Chart correction service (“charT correction service”)
･ Chart correction service for fixed area (“Chart correction service for fixed areas”)
･ Download group ID (“Download group identity”)
･ General call (“General call”)
･ Group call (“group calL”) (Note 1)
Navarea/Metarea
Fixed area : 00000000-00000000
reception Type
satellite Coastal areas
coastal Warning type
F10: Previous
EGC Setu
p