A5-12
A5.4. Self-printing Function
This printer is provided with self-printing function in order to check printing quality or printer’s
condition prior to use. However, with this self-printing function, the printer port is not checked. Prior to
perform self-printing, verify at first the paper is set.
NOTE
If printing is made directly on the platen without ribbon and paper, the platen or printing head may be
damaged.
Test printing
Turn ON the power while pushing [LF] switch and continue to push [LF] switch until self-printing
starts. After the initialization, 5 lines each of DRAFT and NLQ are printed alternatively. By turning
OFF the power, self-printing stops.
[Sample]
To Next Page
Loading...
