EasyManua.ls Logo

JRC jue-87 - USB Drive Management; Connecting USB Drive; USB Drive Management Menu

JRC jue-87
230 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-32
3.7.3 USB Drive Management Menu
Remove USB drive : To remove a USB drive.
Format USB drive : To format a USB drive.
3.7.3.1 Connect the USB Drive
When you connect USB drive, ACS mark is displayed at header area in the display during
recognizing the device.
When the USB drive installation succeeded, The USB drive is installed and ready to use. is
displayed and the USB mark is displayed (ACS mark is disappeared).
When the USB drive installation failed, The attached USB drive has malfunctioned, and DTE
does not recognize the attached USB drive. is displayed.
When the USB device is noncompliant, The attached USB drive is not supported. DTE supports
the USB drive only is displayed.
3.7.3.2 The USB Drive Management Menu
(1) Remove USB drive
When select Remove USB drive and press Enter key ,you remove the USB drive.
Step Operation IME/DTE Response
1
Move the cursor to “Edit”
and press
Enter key.
“Edit” window is displayed.
2
Select “Remove USB drive”
and press
Enter key.
To stop the USB drive, choose Yes.
After the USB drive is stopped,
the USB drive can be safety removed.
YES NO is displayed
3
To remove the USB drive,
select
Yes and press Enter key.
When the processing is succeeded, The USB drive can now
be safely removed from DTE. is displayed and the USB mark
is disappeared.
When the processing is failed, ERROR DTE failed to stop
the USB drive. is displayed.
When USB Device is not connected, DTE failed to detect the
USB drive is displayed.
4
When the processing is
succeeded, remove the USB
drive from IME/DTE.
NOTE
You need your USB drive, when you use.
Do not remove the USB drive, while the USB drive LED which lights up when IME/DTE is
loading from or writing to the USB drive is lighting up. Otherwise, the data in the USB drive might
be destroyed.
When the USB Device is not connected, please close the rubber flap in order to maintain
waterproofing and dust-proofing.
JRC can not accept responsibility for any loss due to use virus-infected USB Device except product
guarantee condition and liability by law.

Table of Contents

Related product manuals