3-6
*When Network Type is Telex
・ IA5
・ ITA2
*When Network Type is except Telex
IA5
・ DATA
*When Network Type is PSTN
■ Modem Type
・ V22
・ V22bis
・ V32bis
1.Empty column is displayed when winIST failed to receive the data.
In this case, carry out following procedure and confirm again.
1). Click [Setting] of menu bar and open the dialogue box of COM PORT, then click [OK], and confirm
that COM PORT is opened normally.
2). Confirm that COM PORT of PC and PORT of IME is connected with serial cable.
3). Confirm INMARSAT terminal works normally or not, by seeing the ligtning of POWER-LED of IME.
2.Operation except [Exit], [Display], and [Ver] is not available during winIST is communicating with
INMARSAT terminal. (the function of inner frame of Fig. 3.2.1c SSAS Schedule screen display
cannot be operated.)
NOTE
To Next Page
Loading...
