JRC JUE-95SA - Transmitting Security Alerts

3-15
3
YES
3.3 Transmitting Security Alert
3.3.1 Flowchart of Security Alert transmission
3.3.2 Security Alert transmission procedure
Step 1 Pull open the button cover of the transparency of the security button forward.
Step 2 Push down red button（ON status：The button is pushed down）.
Security alert transmission is initiated after 30 seconds passed.
OFF status
(Push once) ON Status (Push again） OFF Status
＜Transmission start＞ ＜Transmission cancel>
Security transmission causes no reactions of terminals. No LED lit and buzzer does not sound on
the IME, no communication status is displayed on DTE(optional component), and nothing is printed
on the Printer
(
o
p
tional com
p
onent
)
.
NOTE
Button
Button cover
NO
Push Security button (ON)
Is the button
depressed again
within 30
seconds?
The Security Alert is regularly
transmitted.
Push Security button (OFF)
Sto
p
of Securit
y
Alert transmission
Means user’s action
Means status