4-35
4.4.4 Editing Waypoint Information
· Registered waypoint information (symbol shape, comment, waypoint position) editing can be
performed.
· Waypoints on routes which are currently being executed cannot be edited.
1. Press
, , and then , and display the waypoint list.
2. Move the cursor to the waypoint number you wish to edit.
The cursor can be moved in the following ways:
(1) Move with the up and down keys
(2) Enter the desired number with the numeric keypad
Please refer to "4.8.1 Moving the Cursor within a List" for more details.
3. Press
and display the waypoint registration screen.
Waypoint Registration Screen
(1) To Edit the Waypoint Number
4. Press
"WPT No.".
5. Use the numeric keypad to enter the waypoint number.
The information will change to the entered waypoint number.
(2) To Edit the Symbol Shape
6. Press
"SYMBOL".
7. Press to select the shape, and press
.
(3) To Edit a Comment
8. Press
"COMMENT" and enter the comment.
Please refer to "4.9 Entering Comments" for instructions on how to enter comments.
(4) To Edit the Waypoint Position
9. Press
"POSITION", and enter the waypoint position.
Refer to "4.4.2 Registering Waypoints" for details regarding entering the waypoint position.
10. Press
"ENTRY".
Procedure
To Next Page
Loading...
